Rear sprocket 44 teeth steel 520 Yamaha IT 175, 200, TT-R 600 ... Afam black

Rear sprocket 44 teeth Afam Yamaha IT 175, 200, TT-R 600 ...

Transmission tray par new chain adaptable for quad, enduro motorcycle 175cc, 200cc, 600cc and other cylinders Yamaha IT, TT-R ...

Technical characteristics and dimensions of the rear toothed pinion

• Mark: Afam
• Manufacturer Part Number: 12500-44
• Drive train type: 520
• Number of teeth: 44
• Material: steel
• Black color
• Number of fixing holes: 6
• Type of mounting holes: countersunk

Dimensions of the rear pinion (see marks on the typical drawing)

• A - Fixing center distance: 87 mm
• B - Fixing center distance: 132 mm
• C - Fixing center distance: 176 mm
• D - Diameter of fixing holes: 8 mm
• E - Inner diameter of the crown: 152 mm

It is essential that you you check the type of drive train you need before ordering. On small motorcycles, most 50cc use the 420 (width 6mm, center distance 12.7mm) but some 50s and most 125s use the 428 (width 7mm, center distance 12.7mm) even for 125 in 520 (width 6mm, center distance 15.8mm). All drive train parts, i.e. front sprocket, chain and rear sprocket, absolutely must be of the same type.

applications:

YAMAHA DT 400 (1975 - 1977)
YAMAHA DT 400 MX (1977 - 1978)
YAMAHA IT 175 (1982 - 1983)
YAMAHA IT 200 L (1984 - 1986)
YAMAHA SR 400 (2014 - 2016)
YAMAHA SR 500 (1991 - 2000)
YAMAHA TT 600 K (1993 - 1996)
YAMAHA TT 600 R (1997 - 2002)
YAMAHA YTZ 250 Tri Motorcycle (1985 - 1986)