Rear sprocket 51 aluminum teeth 520 Suzuki RM 125, 250, RM-Z 250, 450... Afam gray

Rear sprocket 51 teeth Afam Suzuki RM125, RMX 250 ...

Transmission tray par new chain adaptable for motorcycle cross 125cc, 250cc and other displacements Suzuki MRI, RMX...

Technical characteristics and dimensions of the rear toothed pinion

• Mark: Afam
• Manufacturer Part Number: 15203N-51
• Drive train type: 520
• Number of teeth: 51
• Material: aluminium
• Colour : grey
• Number of fixing holes: 6
• Diameter of fixing holes: 8 mm
• Type of crown mounting holes: countersunk
• Fixing centers: 73 mm, 126 mm and 146 mm
• Inner diameter of the crown: 126 mm
• Rear sprocket dimensions shown on the diagram

It is essential that you you check the type of drive train you need before ordering. On small motorcycles, most 50cc use the 420 (width 6mm, center distance 12.7mm) but some 50s and most 125s use the 428 (width 7mm, center distance 12.7mm) even for 125 in 520 (width 6mm, center distance 15.8mm). All drive train parts, i.e. front sprocket, chain and rear sprocket, absolutely must be of the same type.

applications:

SUZUKI DR 350 SE (1996 - 1999)
SUZUKI DR 350 USA (1990 - 1999)
SUZUKI DR-Z 400 E (2000 - 2007)
SUZUKI DR-Z 400 S (2000 - 2014)
SUZUKI RM 125 (1984 - 2011)
SUZUKI RM 250 (1983 - 2009)
SUZUKI RMX 250 (1989 - 2002)
SUZUKI RMX 250S (1992 - 1999)
SUZUKI RM-X 450 Z (2010 - 2017)
SUZUKI RM-Z 250 (2007 - 2021)
SUZUKI RM-Z 450 (2005 - 2021)