Crown 48 teeth alu 420 KTM SX 65, Gas Gas MC, Husqvarna TC... Afam

Rear sprocket 48 teeth Afam Husqvarna CR, TC 65, KTM SX 60, 65 ...

Transmission tray par new chain adaptable for motorcycle cross, enduro 60cc, 65cc and 85cc Husqvarna CR, TC, KTM SX.

Technical characteristics and dimensions of the rear toothed pinion

• Mark: Afam
• Manufacturer Part Number: 72101N-48
• Drive train type: 420
• Number of teeth: 48
• Material: aluminium
• Colour : grey
• Number of fixing holes: 5
• Diameter of fixing holes: 8 mm
• Type of crown mounting holes: countersunk
• Fixing centers: 68 mm and 110 mm
• Inner diameter of the crown: 98 mm
• Rear sprocket dimensions shown on the diagram

It is essential that you you check the type of drive train you need before ordering. On small motorcycles, most 50cc use the 420 (width 6mm, center distance 12.7mm) but some 50s and most 125s use the 428 (width 7mm, center distance 12.7mm) even for 125 in 520 (width 6mm, center distance 15.8mm). All drive train parts, i.e. front sprocket, chain and rear sprocket, absolutely must be of the same type.