Swingarm bearings Husqvarna TC, WR... 125, 250... (1996 - 2013) ProX

Swingarm bearings and spacers Prox Husqvarna TC, WR...125, 250...

Replacement kit for rings and bushings right and left of new rear arm adaptable for motorcycles cross, enduro 125cc, 250cc and other displacements Husqvarna TC, WR... from 1996 to 2013.

This reconditioning kit includes

• 2 x inner rings
• 4 x needle bearings (bushes)
• 2 x rubber seals
• 2 x inner rings of oil seals

Technical characteristics and dimensions of the repair kit

• Mark: Prox
• Inner ring dimensions: 17x22x49.3 mm
• Inner Diameter (Swingarm Shaft Diameter): 17mm
• Outer diameter: 22 mm
• Overall length: 49.3 mm
• Needle sleeve dimensions: 22x28x18 mm
• Rubber gasket dimensions: 22x28x5 mm

Applications:

HUSQVARNA 125 CR (1996 - 2008)
HUSQVARNA 125 SMS (1998 - 2013)
HUSQVARNA 125 WR (1996 - 2008)
HUSQVARNA 125 WRE (1998 - 2013)
HUSQVARNA 250 CR (1996 - 2004)
HUSQVARNA 250 TC (2003 - 2007)
HUSQVARNA 250 TE (2003 - 2007)
HUSQVARNA 250 WR (1998 - 2013)
HUSQVARNA 300 WR (2009 - 2013)
HUSQVARNA 360 WR (1996 - 2002)
HUSQVARNA 450 SMR (2003 - 2007)
HUSQVARNA 450 TC (2003 - 2007)
HUSQVARNA 450 TE (2003 - 2007)
HUSQVARNA 510 SMR (2005 - 2007)
HUSQVARNA 510 TC (2005 - 2007)
HUSQVARNA 510 TE (2004 - 2007)