Aluminum piston cylinder Ø39.94 mm Derbi Euro 3, Euro 4 Bidalot RF50WR

Piston cylinder Derbi Euro 3, Euro 4 Bidalot RF50WR with breech

434,60 €

A22204G607

IN STOCK

Delivery possible on Tuesday 14 January

Get 43 Points fidelity8,60 €


Bidalot

We also recommend

Description

High engine aluminum Bidalot 50WR-RF Derbi Euro 3, Euro 4 with cylinder head

Kit piston complete new piston adaptable for motor bike 50cc Derbi Euro3 and Euro4. Also remember to replace the piston pin needle cage of dimension 12x15x15 mm which is not supplied in the high engine kits (this bearing is sold separately).

This piston cylinder block kit includes

  • 1 x cylinder block
  • 1 x piston
  • 1 x cylinder head
  • 1 x set of seals
  • 1 x segment
  • 2 x circlips
  • 1 x gudgeon pin
  • 4 x studs
  • 4 x nuts
  • 4 x fastening screws
  • 4 x washers

Technical characteristics and dimensions of the cylinder block kit

  • Mark: Bidalot
  • Cylinder material: aluminum
  • Piston diameter: 39,94 mm
  • Piston pin diameter: 12 mm

COMPATIBLE MODELS

Compatibility models for guidance, it is advisable to disassemble the part to be replaced beforehand and check the correspondence with pictures and dimensions indicated on the site.

  • RS 50 2T (2006 to 2010)
  • RS 50 2T (from 2018)
  • RS4 50 2T (2011 to 2017)
  • RX 50 2T (2006 to 2010)
  • RX 50 2T (2011 to 2017)
  • RX 50 2T (from 2018)
  • SX 50 2T (2006 to 2010)
  • SX 50 2T (2011 to 2017)
  • SX 50 2T (from 2018)
  • SX 50 Factory 2T (from 2018)
  • GPR 50 2T (2006 to 2010)
  • GPR 50 2 (2011 - 2017)
  • GPR Nude 50 2T (2006 to 2010)
  • Senda R DRD Pro 50 2T (2006 to 2014)
  • Senda R DRD X-Treme 50 2T (2011 to 2017)
  • Senda R DRD X-Treme 50 2T (from 2018)
  • Senda R DRD racing 50 2T (2006 to 2010)
  • Senda R X-Race, X-Treme 50 2T (2006 to 2010)
  • Senda SM DRD EVO 50 2T (2008 to 2010)
  • Senda SM DRD Pro 50 2T (2006 to 2014)
  • Senda SM DRD X-Treme 2T (2011 to 2017)
  • Senda SM DRD racing 50 2T (2006 to 2010)
  • Senda SM Limited 50 2T (from 2018)
  • Senda SM X-Race, X-Treme 50 2T (2006 to 2010)
  • Senda SM Xtreme 50 2T (from 2018)
  • Senda SM racing 50 2T (from 2018)
  • Drifting 50 2T (since 2018)
  • RCR 50 2T (2006 to 2010)
  • RCR 50 2T (2011 to 2017)
  • RCR 50 2T (from 2018)
  • SMT 50 2T (2006 to 2010)
  • SMT 50 2T (2011 to 2017)
  • SMT 50 2T (from 2018)
  • KLE SM 50 2T (from 2010)
  • KLE TT 50 2T (from 2010)
  • SC3 SM 50 2T (from 2013)
  • SC4 Enduro 50 2T (from 2013)
  • N01 Naked 50 2T (2013 to 2017)
  • N01 Naked 50 2T (from 2018)
  • RME Enduro 50 2T (2010 to 2017)
  • RME Enduro 50 2T (from 2018)
  • RME Factory 50 2T (2010 to 2017)
  • RME Factory 50 2T (from 2018)
  • RME Race 50 2T (2010 to 2017)
  • RME Race 50 2T (from 2018)
  • S01 Scrambler 50 2T (2013 to 2017)
  • S01 Scrambler 50 2T (from 2018)
  • SM 50 2T (2010 to 2017)
  • SM 50 2T (from 2018)

Téléchargement

Installation instructions

Products already seen

100% of products shown as in stock actually are!