Crown 39 steel teeth 520 Honda Integra 700, 750... Afam black

Rear sprocket 39 teeth Afam black honda Integra NC and X-ADV 700 and 750

Transmission tray par brand new chain adaptable for 700cc and 750cc Honda scooter Integra NC and 750cc Honda X-ADV.

Technical characteristics of the crown

• Mark: Afam
• Manufacturer Part Number: 10627-39
• Drive train type: 520
• Number of teeth: 39
• Material: steel
• Colour: black
• Number of fixing holes: 5
• Type of mounting holes: smooth

Dimensions of the rear pinion (see marks on the typical drawing)

• A - Fixing center distance: 82 mm
• B - Fixing center distance: 131 mm
• C - Diameter of fixing holes: 12 mm
• D - Inner diameter of the crown: 112 mm

It is essential that you you check the type of drive train you need before ordering. On small motorcycles, most 50cc use the 420 (width 6 mm, center distance 12.7 mm) but some 50s and most 125s use the 428 (width 7 mm, center distance 12.7 mm) even for 125 in 520 (width 6 mm, center distance 15.8 mm). All drive train parts, i.e. front sprocket, chain and rear sprocket, absolutely must be of the same type.