Husqvarna Vitpilen 15 520 teeth 401 box output sprocket... Afam

Husqvarna Vitpilen 15 Husqvarna Vitpilen 520 teeth 401 box output sprocket, KTM Duke 390 ... Afam

Description

Pinion 15 teeth Afam Husqvarna Vitpilen 401, KTM Duke 390 ...

New gearbox output sprocket adaptable for 390cc motorcycle, 401cc Husqvarna Vitpilen, KTM Duke...

Front sprocket technical characteristics and dimensions

Mark: Afam
Manufacturer Part Number: 73305-15
Drive train type: 520
Number of teeth: 15
Material: steel
Colour: grey

Dimensions of the front toothed pinion (see marks on the typical drawing)

A - Inner width (outer diameter of gearbox shaft): 22mm
B - Inner width: 19 mm

A chain is made up of different links, or links, and can be of different widths. It is essential to check the type of secondary transmission which you need before order. All the parts of the kit, namely the pinion, the chain and the crown, must imperatively be same type (not).

Waist	Roller center distance	Inner width of the chain	Type of vehicle
415	12.7 mm	4.88 mm	moped and vintage xNUMXcc motorcycle
420	12.7 mm	6.35 mm	motorcycle 50cc
428	12.7 mm	7.75 mm	50cc motorcycle and some 125cc motorcycles
520	15.88 mm	6.35 mm	125cc motorcycle, quad, moto-cross, enduro 250cc, 450cc ...
525	15.88 mm	7.85 mm	large displacement motorcycle (big cube), kart-cross, quad ...
530	15.88 mm	9.53 mm	large displacement motorcycle (big cube), kart-cross, quad ...
532	15.88 mm	9.53 mm	large displacement motorcycle (big cube), kart-cross, quad ...
630	19.05 mm	9.53 mm	large displacement motorcycle (big cube), kart-cross, quad ...
632	19.05 mm	9.66 mm	large displacement motorcycle (big cube), kart-cross, quad ...

All about the different types of transmission.

applications

HUSQVARNA 401 Svartpilen (2017 - 2022)
HUSQVARNA 401 Vitpilen (2017 - 2022)
HUSQVARNA 401 Vitpilen Aero (2017)

KTM 390 Adventure (2020 - 2022)
KTM 390 Duke (2022)
KTM 390 Duke ABS (2014 - 2021)
KTM RC 390 (2014 - 2022)
KTM RC 390R (2018)

COMPATIBLE MODELS

Compatibility models for guidance, it is advisable to disassemble the part to be replaced beforehand and check the correspondence with pictures and dimensions indicated on the site.