Universal license plate holder mud flap with white LED triangle light Fifty (hollow support)

Universal License Plate Holder with Fire

Rear fender flap new adaptable for motorcycles, moped 50cc, 125cc all models, with adaptations.

Technical characteristics and dimensions of the rear mudguard

• Material : plastic
• Plastic color: black
• Cabochon taillight color: white, transparent
• Overall length: 330 mm
• Overall width: 110 mm
• Fixing distance: 64 mm
• Connecting the taillight: 3 Yarn
• With turn signal fasteners

More details of the universal license plate holder with light for motorcycle 50, 125 and other displacements

This plate holder with LED light is fixed directly under the chassis of your two wheels. You will need to bring Ø 5mm screw to install this license plate holder. It has two holes on each side so you can install your blinkers.

Connecting the taillight: The color of the wires may vary depending on the type of fire. For this model here are the correspondences (right photo above, left part):

• green wire = mass
• yellow wire = night light
• blue wire = stop

The electric harnesses (right picture above, right) are different depending on the makes and models of vehicles. You will obtain all the necessary information by consulting the technical drawings of the manufacturer's manual of your machine. Do not hesitate to bring you thimbles to make your changes.