Front brake disc Vent Derapage 50 (since 2018) Ø300 mm

Front brake disc for Vent motorcycle Derapage 50

Brand new original front brake plate for 50cc Vent motorcycle Derapage since 2018.

Be sure to check the dimensions of the disc you need before ordering. If the outer diameter of the brake disc is different from the original one, an offset tab (adaptor) will then have to be added. Also remember to put a drop of “threadlock” type glue on the disc screws during assembly. Finally, don't forget to replace your brake pads when changing discs.

Technical characteristics of the disc

• Brand: Vent
• Manufacturer reference: K01320300
• Material: steel
• Number of fixing holes: 6
• Type of mounting holes: shouldered
• Thickness: 4 mm

Dimensions of the disc (see marks on the typical diagram)

• A - Fixing center distance: 72 mm
• B - Fixing center distance: 124 mm
• C - Fixing center distance: 143 mm
• D - Outer Diameter: 300 mm
• E - Diameter fixing holes: 6 mm
• F - Inner Diameter: 127 mm

To find out how to choose the right brake disc for you, refer to our guide by clicking You can consult it by clicking here..

Vent is an Italian brand specializing in the manufacture of parts for motorcycles. To discover our range of Vent products, click on this link.