Transmission tray par brand new original chain for motorcycle 50cc, 125cc Kymco, Mash, Masai, Hanway, Honda, AGM Café Racer, Brixton ...
Technical characteristics and dimensions of the rear toothed pinion
Mark: Kymco
Drive train type: 428
Number of teeth: 43
Material: steel
Colour : grey
Number of fixing holes: 4
Fixing centers: 90 mm and 64 mm
Diameter of fixing holes: 10 mm
Rear sprocket dimensions shown on the diagram
It is essential that you you check the type of drive train you need before ordering. On small motorcycles, most 50cc use the 420 (width 6mm, center distance 12.7mm) but some 50s and most 125s use the 428 (width 7mm, center distance 12.7mm) even for 125 in 520 (width 6mm, center distance 15.8mm). All drive train parts, i.e. front sprocket, chain and rear sprocket, absolutely must be of the same type.
COMPATIBLE MODELS
Compatibility models for guidance, it is advisable to disassemble the part to be replaced beforehand and check the correspondence with pictures and dimensions indicated on the site.