Indicators leds Quick black

Pair of universal turn signals Quick black for motorcycles and scooters

Set of new right and left direction lights adaptable for motorcycle, moped, scooter, quad, buggy 50cc, 125cc and other displacements. This kit of two flashing lights is adaptable, depending on the model it may be necessary to adapt the attachment and modify the connection lugs to your beam. They can be mounted on the front or the back.

This pair of turn signals includes

• 1 x flashing right
• 1 x flashing left

Technical characteristics and dimensions of alarms

• Brand: generic
• Model: Quick black
• Type: leds
• 12 Volts Power Supply
• 2 wire connection

• Cabochon color: transparent white
• Flashing color: black
• Total length of a turn signal: 98 mm
• Total width of a turn signal: 36 mm
• Diameter thread fixing: 8 mm
• No threading: 1.25
• Approved indicators

More details on the Quick black led indicators for motorcycle 50, 125, scooter, moped, quad...

Quick black leds turn signals can easily be connected using two wires. To fix the indicators, equip yourself with a 13 Flat Key. If your turn signals are a little hidden behind your headlight plate, you can use a washer or a nut to make a type of "wedge" and make your flashers completely visible.

Connection: - If your wiring harness has two round lugs (like the left side of the right picture above), you'll just have to plug your lugs (wire - on wire -, and wire + on + wire). Be careful, the colors of the wires vary depending on the model.

- If your beam does not have round lugs, it will be necessary to adapt your connection (see picture on the right above). To get yourself armed 2 pin connector and a needle-nose plier.

Find below the tutorial that will help you change its front face (headlight plate, mudguard, indicators).