Rear sprocket 41 steel teeth 428 Hyosung, Jincheng, Suzuki 125 ... Afam

41 crown teeth 428 Afam Hyosung, Jincheng, Suzuki 125 ...

Transmission tray par new chain adaptable for motorcycle 125cc Suzuki GN, Hyosung Karion, Jincheng Abila ...

Technical characteristics and dimensions of the rear toothed pinion

• Mark: Afam
• Manufacturer Part Number: 14201-41
• Drive train type: 428
• Number of teeth: 41
• Material: steel
• Colour : grey
• Number of fixing holes: 4
• Diameter of fixing holes: 8 mm
• Crown Fixing Hole Type: Smooth
• Fixing centers: 55 mm and 78 mm
• Inner diameter of the crown: 58 mm
• Rear sprocket dimensions shown on the diagram

It is essential that you you check the type of drive train you need before ordering. On small motorcycles, most 50cc use the 420 (width 6mm, center distance 12.7mm) but some 50s and most 125s use the 428 (width 7mm, center distance 12.7mm) even for 125 in 520 (width 6mm, center distance 15.8mm). All drive train parts, i.e. front sprocket, chain and rear sprocket, absolutely must be of the same type.

applications:

HYOSUNG GA Cruise (1995 - 1998)

HYOSUNG GA Cruise II (xnumx - xnumx)

HYOSUNG GF125 (2000 - 2005)

HYOSUNG GV 125 Aquila (2001 - 2010)

HYOSUNG GV 125 C (2007 - 2015)

HYOSUNG RT 125 Karion (2002 - 2015)

HYOSUNGRX 125 D Enduro (1999 - 2006)

HYUNDAI HMZ125 Cruise (1995 - 1998)

JINCHENG 125 ABILA (2007 â € “2008)

KAWASAKI KH 125 (1977 â € “1982)

SUZUKI GN 125 (1982 - 2001)

SUZUKI GN 125E (1994 - 2001)

SUZUKI GP 125 (1978 - 1989)

SUZUKI GS 125 (1982 - 1984)

SUZUKI GS 125 ES (1982 - 2000)

SUZUKI GT 125 (1974 - 1981)

SUZUKI RG 125 BU Gamma (1988)

SUZUKI RG 125C Gamma (1986 - 1990)

SUZUKI RG 125 Gamma (1988)

SUZUKI RG 125 UA (1986 - 1988)

SUZUKI RG 80 Gamma (1984 - 1993)

SUZUKI RV 125 (1973 - 1976)

SUZUKI TU 125 (1999)