Sprocket 15 teeth 520 Cagiva WMX, Husqvarna CR 250 ... Afam

Sprocket out of box 15 teeth 520 teeth Cagiva WMX, Husqvarna CR 250... Afam

Description

Pinion 15 teeth Afam Cagiva WMX, Husqvarna CR 250 ...

New gearbox output pinion adaptable for motorbike, motorbike cross, enduro 125cc, 250cc ... Kawasaki Eliminator, Cagiva WMX, Husqvarna CR ...

Front sprocket technical characteristics and dimensions

Mark: Afam
Manufacturer Part Number: 24302-15
Drive train type: 520
Number of teeth: 15
Material: steel
Colour: grey

Dimensions of the front toothed pinion (see marks on the typical drawing)

A - Inner width (outer diameter of gearbox shaft): 25mm
B - Inner width: 21 mm

A chain is made up of different links, or links, and can be of different widths. It is essential to check the type of secondary transmission which you need before order. All the parts of the kit, namely the pinion, the chain and the crown, must imperatively be same type (not).

Waist	Roller center distance	Inner width of the chain	Type of vehicle
415	12.7 mm	4.88 mm	moped and vintage xNUMXcc motorcycle
420	12.7 mm	6.35 mm	motorcycle 50cc
428	12.7 mm	7.75 mm	50cc motorcycle and some 125cc motorcycles
520	15.88 mm	6.35 mm	125cc motorcycle, quad, moto-cross, enduro 250cc, 450cc ...
525	15.88 mm	7.85 mm	large displacement motorcycle (big cube), kart-cross, quad ...
530	15.88 mm	9.53 mm	large displacement motorcycle (big cube), kart-cross, quad ...
532	15.88 mm	9.53 mm	large displacement motorcycle (big cube), kart-cross, quad ...
630	19.05 mm	9.53 mm	large displacement motorcycle (big cube), kart-cross, quad ...
632	19.05 mm	9.66 mm	large displacement motorcycle (big cube), kart-cross, quad ...

All about the different types of transmission.

applications:

CAGIVA WMX 250 (1989 - 1990)

HUSQVARNA CR250 (1990 - 1994)
HUSQVARNA WR 250 (1992 - 1998)
HUSQVARNA WR 360 (1992 - 1999)
HUSQVARNA WRK 240 (1990 - 1991)

KAWASAKI KX250 (1985 - 1986)
KAWASAKI KX500 (1983 - 1986)

COMPATIBLE MODELS

Compatibility models for guidance, it is advisable to disassemble the part to be replaced beforehand and check the correspondence with pictures and dimensions indicated on the site.