Parts and equipment for motorcycles, quads, scooters and bicycles

Troubleshooting > Failures par brand > SHERCO > SHERCO SE-R > Lack of power on my SHERCO SE-R 50


My SHERCO SE-R 50 lacks power

The loss of power can be continuous and threatens your engine with not being able to run at all. A loss of power can be caused epar several factors, some of which you can easily remedy.

Your SHERCO SE-R 50 motorcycle lacks power, it runs out of steam and has trouble climbing the hills. Frequent on small cylinders, this problem is usually due to a lack of maintenance.

Usage check:

1) Ignition : spark plug , antiparasitic, malfunction of the CDI case to ignition coils .

2) Carburation: Gasoline flow, carburation adjustment, too lean in air (air filter clogged), too rich in air (intake air), accelerator controls not adjusted, tank cap open!

3) Engine: check the clearance with valves and the timing, theexhaust may be dirty.

4) Transmission: Check the ratio of the bevel torque (number of teeth sprocket or pinion et rear sprocket ), the voltage of the chain.

5) Acceleration hole: mixture too lean, check the color of the spark plug , check the setting of the Air adjusting screw, the state of air filter, the absence of air intake at the carburettor .

motorcycle battery failure 50

Lack of general maintenance on your SHERCO SE-R 50 can cause its performance to deteriorate. Take care of your two-wheeler with regular maintenance.


HERE 100% OF THE PARTS INDICATED IN STOCK REALLY ARE!