Parts and equipment for motorcycles, quads, scooters and bicycles

Troubleshooting > Failures par brand > TNT MOTOR > Lack of power on my TNT MOTOR


My TNT MOTOR lacks power

The loss of power can be continuous and threatens your engine with not being able to run at all. A loss of power can be caused epar several factors, some of which you can easily remedy.

Your TNT MOTOR motorcycle lacks power, it runs out of steam and has trouble climbing the hills. Frequent on small cylinders, this problem is usually due to a lack of maintenance.

Usage check:

1) Ignition : spark plug , antiparasitic, malfunction of the CDI case to ignition coils .

2) Carburation: Gasoline flow, carburation adjustment, too lean in air (air filter clogged), too rich in air (intake air), accelerator controls not adjusted, tank cap open!

3) Engine: check the clearance with valves and the timing, theexhaust may be dirty.

4) Transmission: Check the ratio of the bevel torque (number of teeth sprocket or pinion et rear sprocket ), the voltage of the chain.

5) Acceleration hole: mixture too lean, check the color of the spark plug , check the setting of the Air adjusting screw, the state of air filter, the absence of air intake at the carburettor .

motorcycle battery failure 50

The lack of general maintenance of your TNT MOTOR can cause its performance to deteriorate. Take care of your two-wheeler with regular maintenance.


HERE 100% OF THE PARTS INDICATED IN STOCK REALLY ARE!