Parts and equipment for motorcycles, quads, scooters and bicycles

General information > Tips and Guides > Tutorials > Off-road motorcycle > Equipment > Install a Roll-off on a mask cross

TUTORIAL Install a Roll-off on mask cross

Ce tutorial aims at you help install a Roll-off system on your mask cross. Discover on our site all the masks, screens and roll-off and tear-off systems for off-road and quad riding.

Find our guide: How to choose the right mask

Difficulty :

Temps necessary:

5 minutes

Necessary material :

HOW TO ASSEMBLE A ROLL-OFF ON A MASK CROSS (AHDES MASK)

Install Roll-off step five

1) Remove the items from their packaging.

Install Roll-off step 2

2) The screen is clipped onto the internal contour of the mask cross.

Install Roll-off step 3

3) Unclip the screen by pulling to release the screen, you must pull on the top of the frame while firmly holding the bottom.

Install Roll-off step 4

4) Pull, trying to spread the top and bottom of the frame. Remove the screen completely.

Install Roll-off step 5

5) Remove the Roll-off screen protection (front and back).

Install Roll-off step 6

6) Apply the Mud-flap just above the Roll-off strip. To ensure good adhesion, bend the screen.

Install Roll-off step 7

7) You must insert the screen into its housing, making sure to properly align the fixings located on the screen and in the frame.

Install Roll-off step 8

8) Tuck in and clip the Roll-off screen around the edge of the mask.


Appeared around ten years ago, the roll-off system allows you to ride in the worst conditions.

With a film positioned in front of the field of view, you scroll the film in order to have a part of the mask clean. The dirty film will wind up in another compartment.

Essential accessory for the proper use of your mask cross.

VIDEO: ASSEMBLE A ROLL-OFF ON A MASK CROSS


HERE 100% OF THE PARTS INDICATED IN STOCK REALLY ARE!