Parts and equipment for motorcycles, quads, scooters and bicycles

General information > Tips and Guides > Tutorials > Off-road motorcycle > Equipment > Replace a Roll-off on a mask cross

TUTORIAL Replace the Roll-off on mask cross

Ce tutorial aims at you help replace the Roll-off system on your mask cross. Discover on our site all the masks, screens and roll-off and tear-off systems for off-road and quad riding.

Find our guide: How to choose the right mask

Difficulty :

Temps necessary:

5 minutes

Necessary material:

HOW TO REPLACE A ROLL-OFF ON A MASK CROSS (AHDES MASK)

Replace Roll-off step 1

1) Press the clip to open the cover on each side and remove the covers.

Replace Roll-off step 2

2) The new Roll-off is installed on the left part of the mask. Insert the roll-off roller in the location opposite the pull tab, respecting the direction indicated on the roller.

Replace Roll-off step 3

3) It is positioned at the level of the supports on the side.

Replace Roll-off step 4

4) Stretch and place the Roll-off below the mud-flap. The plastic film must go under the mud-flap.

Replace Roll-off step 5

5) Wind the adhesive tape from the beginning of the Roll-off roll onto the swivel support.

Replace Roll-off step 6

6) Insert the media into its slot.

Replace Roll-off step 7

7) Check that the Roll-off is correctly placed under the mud-flap.

Replace Roll-off step 8

8) Replace the covers (left side then right side).

Replace Roll-off step 9

9) Using the pull tab, check that the Roll-off slides correctly. Press the right cover to create resistance on the Roll off and activate the pull tab to unwind the new film and tighten it.

The Roll-off strip will remove the waste that bothers you in your field of vision. It may happen that on certain races tear-offs are prohibited for ecological reasons, the Roll-off is therefore an excellent alternative.

Hint: add a piece of tape to the top of the Roll-off cover to ensure the complete closure of your Roll-off and prevent the worn part from bothering you.

Another tip: stick a piece of mud flap to the right side of the mask - it will remove dirt when rolling up the used film and ensure better use of the Roll-off.

VIDEO: REPLACING A ROLL-OFF ROLLER ON A MASK CROSS


HERE 100% OF THE PARTS INDICATED IN STOCK REALLY ARE!