Crown 46 Husqvarna CR, TC 420, KTM steel teeth 65 teeth SX 60, 65 ... Supersprox black

Rear sprocket 46 teeth Supersprox black Husqvarna CR, TC, KTM SX 60, 65 ...

Transmission tray par new chain adaptable for motorcycle cross 60cc, 65cc and 85cc Husqvarna CR, TC and KTM SX.

Technical characteristics of the crown

• Mark: Supersprox
• Drive train type: 420
• Number of teeth: 46
• Material: steel
• Colour: black
• Number of fixing holes: 5
• Type of mounting holes: countersunk

Dimensions of the rear pinion (see marks on the typical drawing)

• A - Fixing center distance: 67 mm
• B - Fixing center distance: 110 mm
• C - Diameter of fixing holes: 8 mm
• D - Inner diameter of the crown: 98 mm

It is essential that you you check the type of drive train you need before ordering. On small motorcycles, most 50cc use the 420 (width 6 mm, center distance 12.7 mm) but some 50s and most 125s use the 428 (width 7 mm, center distance 12.7 mm) even for 125 in 520 (width 6 mm, center distance 15.8 mm). All drive train parts, i.e. front sprocket, chain and rear sprocket, absolutely must be of the same type.