Rear brake disc Polaris Magnum, Scrambler 500...Ø177.5 mm wave NG Brakes

Rear brake disc 177.5 mm wave NG Brakes Polaris Magnum, Scrambler 500 ...

New rear brake plate adaptable for 325cc, 400cc quad and other displacements Polaris Magnum, Scrambler...

It is essential to make sure of the type of disc you need before ordering by checking its dimensions. The outside diameter of some brake discs may differ from the original assembly, a dropout (adapter) must then be added in this case. It is also necessary to replace your brake pads when changing the disc. Also remember to put a drop of "thread lock" type glue on the disc screws to prevent them from loosening.

Technical characteristics of the disc

• Mark: NG Brakes
• Manufacturer Part Number: 493X
• Material: steel
• Number of fixing holes: 3
• Type of mounting holes: smooth

Dimensions of the disc (see marks on the typical diagram)

• A - Fixing center distance: 66 mm
• B - Outer Diameter: 177.5 mm
• C - Diameter fixing holes: 10 mm
• D - Inner Diameter: 51.5 mm

Applications:

POLARIS MAGNUM 4NUMX 4 500/99
POLARIS XPEDITION 4NUMX 4 425
POLARIS SCRAMBLER 2NUMX 4 500/96
POLARIS SCRAMBLER L 4NUMX 4 400/95
POLARIS SPORT L 400 94/98
POLARIS MAGNUM 500 01/02
POLARIS MAGNUM 2NUMX / 4X4 4 325
POLARIS MAGNUM MOOSE 2X4 / 4X4 325 01
POLARIS SCRAMBLER 2NUMX 4 500/01
POLARIS SCRAMBLER 2NUMX/4NUMX 4 4/400
POLARIS SCRAMBLER 4NUMX 4 500/98
POLARIS TRAIL 250 99/04 BLAZER
POLARIS TRAIL 400 03 BLAZER
POLARIS TRAIL BLAZER FREEDOM 250 01/04
POLARIS TRAIL BOSS 325 00/02
POLARIS TRAIL BOSS 330 03/04
POLARIS 325 00 EDITION