Pinion Peugeot 103 SPX, RCX... 13 teeth 415 â€“ Motorcycle part, scooter,...

Pinion Peugeot 103 SPX, RCX... 13 teeth 415

Description

Pinion 13 teeth Peugeot 103 SPX, RCX...

New front transmission sprocket adaptable for moped, moped 50cc Peugeot 103 Clip, SPX, RCX... Attention, you cannot mount this sprocket with a reinforced chain, but only with a standard chain as proposed in the associated products of this reference.

Technical characteristics and dimensions of the mob sprocket

Brand: generic
Drive train type: 415
Number of teeth: 13
Material: steel
Colour: grey

Dimensions of the front toothed pinion (see marks on the typical drawing)

A - Inner width (outer diameter of gearbox shaft): 15mm
B - Inner width: 13.5 mm

A chain is made up of different links, or links, and can be of different widths. It is essential to check the type of secondary transmission which you need before order. All the parts of the kit, namely the pinion, the chain and the crown, must imperatively be same type (not).

Waist	Roller center distance	Inner width of the chain	Type of vehicle
415	12.7 mm	4.88 mm	moped and vintage xNUMXcc motorcycle
420	12.7 mm	6.35 mm	motorcycle 50cc
428	12.7 mm	7.75 mm	50cc motorcycle and some 125cc motorcycles
520	15.88 mm	6.35 mm	125cc motorcycle, quad, moto-cross, enduro 250cc, 450cc ...
525	15.88 mm	7.85 mm	large displacement motorcycle (big cube), kart-cross, quad ...
530	15.88 mm	9.53 mm	large displacement motorcycle (big cube), kart-cross, quad ...
532	15.88 mm	9.53 mm	large displacement motorcycle (big cube), kart-cross, quad ...
630	19.05 mm	9.53 mm	large displacement motorcycle (big cube), kart-cross, quad ...
632	19.05 mm	9.66 mm	large displacement motorcycle (big cube), kart-cross, quad ...

All about the different types of transmission.

COMPATIBLE MODELS

Compatibility models for guidance, it is advisable to disassemble the part to be replaced beforehand and check the correspondence with pictures and dimensions indicated on the site.

Cyclomoteur

Peugeot