Rear sprocket 48 teeth steel 520 Yamaha WR 125, 250, YZ 250... Sunstar gray

Crown 48 teeth 520 Sunstar gray Yamaha WR, YZ...125, 250...

Transmission tray par new chain adaptable for motorcycle 125cc, 175cc, 250c and other displacements Yamaha WR, YZ, IT, TT and TT-R.

Technical characteristics of the crown

• Mark: Sunstar
• Drive train type: 520
• Number of teeth: 48
• Material: steel
• Colour: grey
• Number of fixing holes: 6
• Type of mounting holes: countersunk

Dimensions of the rear pinion (see marks on the typical drawing)

• A - Fixing center distance: 87 mm
• B - Fixing center distance: 152 mm
• C - Fixing center distance: 175 mm
• D - Diameter of fixing holes: 8 mm
• E - Inner diameter of the crown: 152 mm

It is essential that you you check the type of drive train you need before ordering. On small motorcycles, most 50cc use the 420 (width 6 mm, center distance 12.7 mm) but some 50s and most 125s use the 428 (width 7 mm, center distance 12.7 mm) even for 125 in 520 (width 6 mm, center distance 15.8 mm). All drive train parts, i.e. front sprocket, chain and rear sprocket, absolutely must be of the same type.