Scrolling indicators and LED rear lights Lampa black victory

Pair of dynamic indicators and universal black rear lights Lampa Victory

Set of right and left direction lights with pilot light and new rear brake lights adaptable for motorcycle, moped, scooter, quad, buggy 50cc, 125cc and other displacements. For the proper functioning of your indicators, it is advisable to order two pairs (one pair at the front, one at the rear) and to remove the flasher unit. These sequential indicators do not need a control unit to work, if you keep the original flasher control unit, the led bar will not work until the end of the indicator.
To remove your flasher unit, you must shunt/short-circuit a U with the wires of your flasher unit. To make this connection, you must connect the current inlet wire of your control unit with the output wire of this control unit. We have no information regarding the location of your vehicle's flasher unit or the type of connection to your harness. This kit of two flashing lights is adaptable, depending on the model it may be necessary to adapt the fixing, modify the connection lugs to your harness and add resistors. They can be front or rear mounted.

This pair of turn signals includes

• 1 x flashing right
• 1 x flashing left

Technical characteristics and dimensions of horns with blue daytime running lights

• Mark: Lampa
• Model: Victory
• Type: leds
• 12 volts power supply

• Cabochon color: smoky black
• Flashing color: black
• Total length of a turn signal: 90 mm
• Diameter thread fixing: 8 mm
• No threading: 1.25
• Approved indicators