Rear brake disc Yamaha MT-07, YZF-R7, MT-09... Ø245 mm Braking

Rear brake disc Braking Yamaha MT07, R7, MT09...

New rear brake plate adaptable for 690cc, 700cc, 900cc and other engine sizes motorcycles Yamaha MT-07, YZF R7, MT-09...

Be sure to check the dimensions of the disc you need before ordering. If the outer diameter of the brake disc is different from the original one, an offset tab (adaptor) will then have to be added. Also remember to put a drop of “threadlock” type glue on the disc screws during assembly. Finally, don't forget to replace your brake pads when changing discs.

Technical characteristics of the disc

• Mark: Braking
• Manufacturer Part Number: RF7549
• Material: steel
• Number of fixing holes: 5
• Type of mounting holes: shouldered
• Thickness: 5 mm

Dimensions of the disc (see marks on the typical diagram)

• A - Fixing center distance: 88 mm
• B - Fixing center distance: 143 mm
• C - Outer Diameter: 245 mm
• D - Diameter fixing holes: 10 mm
• E - Inner Diameter: 130 mm

To find out how to choose the right brake disc, refer to our guide by clicking on this link.

Applications:

YAMAHA
YZF R7 690 2022 - 2023 POST - DX
FZ-07 700 2015 - 2016 POST - DX
MT-07 700 2014 - 2015 POST - DX
MT-07 ABS 700 2014 - 2022 POST - DX
MT-07 MOTORCYCLE CAGE ABS 700 2014 - 2017 POST - DX
MT-07 TRACER ABS 700 2016 - 2020 POST - DX
XSR ABS 700 2016 - 2018 POST - DX
XTZ TENERE 700 2019 - 2024 POST - DX
XTZ TENERE RALLY EDITION 700 2021 POST - DX
MT-09 850 2014 - 2015 POST - DX
MT-09 ABS 850 2014 - 2020 POST - DX
MT 09 SP ABS 850 2018 - 2020 POST - DX
MT-09 SPORT TRACKER ABS 850 2016 POST - DX
MT-09 STRET RALLY ABS 850 2014 - 2016 POST - DX
MT-09 TRACER ABS 850 2015 - 2020 POST - DX
XSR 900 ABARTH ABS 850 2017 - 2018 POST - DX
XSR 900 ABS 850 2016 - 2019 POST - DX
MT-09 900 2021 POST - DX

Braking is an Italian brand specializing in the design of braking systems for two-wheelers, quads and bicycles. To find out everything about the brand and discover our range of products Braking, click on this link.