Parts and equipment for motorcycles, quads, scooters and bicycles

Rear sprocket 53 teeth steel 420 Derbi Senda (before 2000)

30,40

A22185C001

IN STOCK

Delivery possible from Monday 1 April

Get 3 Points fidelity0,60


We also recommend

Description

Rear sprocket 53 teeth Derbi Senda before 2000

Transmission tray par new chain adaptable for motorcycle 50cc Derbi Senda R, SM and L before 2000.

Technical characteristics and dimensions of the rear toothed pinion

  • Brand: generic
  • Drive train type: 420
  • Number of teeth: 53
  • Material: steel
  • Colour : grey
  • Diameter of fixing holes: 8 mm
  • Crown Fixing Hole Type: Smooth
  • Fixing centers: 42 mm and 80 mm
  • Offset (overall width): 13 mm
  • Inner diameter of the crown: 53 mm
  • Rear sprocket dimensions shown on the diagram

It is essential that you you check the type of drive train you need before ordering. On small motorcycles, most 50cc use the 420 (width 6mm, center distance 12.7mm) but some 50s and most 125s use the 428 (width 7mm, center distance 12.7mm) even for 125 in 520 (width 6mm, center distance 15.8mm). All drive train parts, i.e. front sprocket, chain and rear sprocket, absolutely must be of the same type.

COMPATIBLE MODELS

Compatibility models for guidance, it is advisable to disassemble the part to be replaced beforehand and check the correspondence with pictures and dimensions indicated on the site.

50 with box

Derbi
  • Senda L 50 2T (1994 - 1999)
  • Senda R 50 2T (1994 - 1999)
  • Senda SM 50 2T (1994 - 1999)

Similar products

Products already seen

HERE 100% OF THE PARTS INDICATED IN STOCK REALLY ARE!