Rear sprocket 50 teeth steel 420 Sherco SE, Suzuki RMX, SMX... Afam

Rear sprocket 50 teeth steel 420 Sherco SE, Suzuki RMX, SMX... Afam

24,40 €

A67045C001

IN STOCK

Delivery possible from Tuesday 25 February

Get 2 Points fidelity0,40 €


Afam

We also recommend

Description

50 crown teeth 420 Afam Sherco SE, Suzuki RMX, SMX...

Transmission tray par new chain adaptable for motorcycle 50cc Sherco SE, Suzuki RMX, SMX...

Technical characteristics and dimensions of the rear toothed pinion

  • Mark: Afam
  • Manufacturer Part Number: 14109-50
  • Drive train type: 420
  • Number of teeth: 50
  • Material: steel
  • Colour : grey
  • Number of fixing holes: 6
  • Diameter of fixing holes: 8 mm
  • Crown Fixing Hole Type: Smooth
  • Fixing centers: 42 mm, 80 mm, 108 mm and 123 mm
  • Inner diameter of the crown: 110mm
  • Rear sprocket dimensions shown on the diagram

It is essential that you you check the type of drive train you need before ordering. On small motorcycles, most 50cc use the 420 (6mm width, 12.7mm pitch) but some 50s and most 125s use the 428 (7mm width, 12.7mm pitch) even for 125 in 520 (6mm width, 15.8mm pitch). All drive train parts, i.e. front sprocket, chain and rear sprocket, absolutely must be of the same type.

COMPATIBLE MODELS

Compatibility models for guidance, it is advisable to disassemble the part to be replaced beforehand and check the correspondence with pictures and dimensions indicated on the site.

  • Enduro 50 2T (1998 to 2005)
  • SE 50 2T (2006 to 2012)
  • SE-R Enduro 50 2T (2013 to 2017)
  • SE-R Enduro 50 2T (from 2018)
  • SM 50 2T (1998 to 2005)
  • SM 50 2T (2006 to 2012)
  • SM-R 50 2T (2013 to 2017)
  • SM-R 50 2T (from 2018)
  • RMX 50 2T (1996 to 2001)
  • SMX 50 2T (1996 to 2001)

Products already seen

100% of products shown as in stock actually are!