Rear sprocket 52 teeth steel 420 Peugeot XP6 (1197 - 2003), MH Furia, CH Racing... grey

Rear sprocket 52 teeth Peugeot XP6, MH Furia and CH Husqvarna

Transmission tray par new chain adaptable for motorcycle 50cc Peugeot, CH Racing, MH and Husqvarna.

Technical characteristics and dimensions of the rear toothed pinion

• Brand: generic
• Drive train type: 420
• Number of teeth: 52
• Material: steel
• Colour : grey
• Number of fixing holes: 6
• Diameter of fixing holes: 8 mm
• Crown Fixing Hole Type: Smooth
• Fixing centers: 39 mm and 74 mm
• Inner diameter of the crown: 105 mm
• Rear sprocket dimensions shown on the diagram

It is essential that you you check the type of drive train you need before ordering. On small motorcycles, most 50cc use the 420 (width 6mm, center distance 12.7mm) but some 50s and most 125s use the 428 (width 7mm, center distance 12.7mm) even for 125 in 520 (width 6mm, center distance 15.8mm). All drive train parts, i.e. front sprocket, chain and rear sprocket, absolutely must be of the same type.