Type red tail light Derbi Senda, Gilera SMT... (2011)

Universal red light suitable for LEDs DRX for motorcycles and scooters

Position lamp and rear stop new adaptable DRX leds for motorcycle, moped, scooter, quad, buggy 50cc, 125cc and other engine. This rear light is adaptable, depending on the model it may be necessary to adapt the attachment and modify the connection lugs to your beam.

Technical characteristics and dimensions of universal rear lighting

• Brand: generic
• Rear position light: yes
• Rear brake light: yes
• 3 wire connection
• LED light
• Led bulb type provided: yes
• Supply voltage: 12V
• Fixing distance: 110 mm
• Thread diameter: 6 mm
• No threading: 1.0
• Total length of fire: 142 mm
• Total fire width: 82 mm
• Approved fire

This red light with leds DRX installs directly on the rear bib of your vehicle. You will need to bring a 10 Flat Key to install this fire by screwing the nuts located behind. You can put this fire on the rear bib A22341D001 to Derbi Senda.

Connection: The color of the wires may vary depending on the type of fire. For this model here are the correspondences (right photo above, left part):

• green wire = mass
• brown wire = night light
• yellow / green thread = stop

The electric harnesses (right picture above, right) are different depending on the makes and models of vehicles. You will obtain all the necessary information by consulting the technical drawings of the manufacturer's manual of your machine. Do not hesitate to bring you thimbles to make your changes.

Find our full range of rear light DRX at leds.