Rear sprocket 32 teeth steel 420 Yamaha Chappy, FS1,RZ, DT MX 50, PW 80 ... Afam

Rear sprocket 32 teeth Afam Yamaha Chappy, FS1, DTMX, MBK ZX, PW80...

Transmission tray par new chain adaptable for motorcycle 50cc Yamaha Chappy, FS1, DT MX and MBK ZX ...

Technical characteristics and dimensions of the rear toothed pinion

• Mark: Afam
• Manufacturer Part Number: 12101-32
• Drive train type: 420
• Number of teeth: 32
• Material: steel
• Colour : grey
• Number of fixing holes: 4
• Diameter of fixing holes: 8 mm
• Crown Fixing Hole Type: Smooth
• Fixing centers: 57 mm and 80 mm
• Inner diameter of the crown: 64 mm
• Rear sprocket dimensions shown on the diagram

It is essential that you you check the type of drive train you need before ordering. On small motorcycles, most 50cc use the 420 (width 6mm, center distance 12.7mm) but some 50s and most 125s use the 428 (width 7mm, center distance 12.7mm) even for 125 in 520 (width 6mm, center distance 15.8mm). All drive train parts, i.e. front sprocket, chain and rear sprocket, absolutely must be of the same type.

applications:

YAMAHA FS1 50 (1976 - 1979)

YAMAHA LB50 Chappy (1980 - 1994)

YAMAHA LB2 Chappy (1980)

YAMAHA LB3 Bop (80)

YAMAHA LC 50 MX Bop (1980)

YAMAHA PW 80 (1983 - 2013)

YAMAHA RD 50 M (1979 - 1980)

YAMAHA RD 50 MX (1981 - 1987)

YAMAHA RD 80 LC (1982)

YAMAHA RD 80 MX (1982)

YAMAHA RT 100 (1993 - 2003)

YAMAHA RX 80 SE (1982)

YAMAHA RZ 50 (2002)

YAMAHA TT-R 110 E (2008 - 2020)

YAMAHA TT-R 50 E (2006 - 2020)

YAMAHA TT-R 90 (2000 - 2004)

YAMAHA TT-R 90 E (2004 - 2007)