420 chain quick coupler DID hyper enhanced

420 chain split link for motorbikes and quads

New transmission chain quick mesh adaptable for motorcycle, scooter, quad, buggy 50cc, 125cc...

Technical characteristics and dimensions of the fastener

• Mark: DID
• Drive train type: 420
• Quality: hyper reinforced
• Quick mesh colors: black and gray

For mounting a chain with quick release, multi-grip pliers and possibly a flat screwdriver will suffice. If you need to shorten it then you will need a chain tool. To avoid this, remember to count the number of links necessary to order the correct length.

A chain is made up of different links, or links, and can be of different widths. It is essential to check the type of secondary transmission which you need before order. All the parts of the kit, namely the pinion, the chain and the crown, must imperatively be same type (not).

All about the different types of transmission.

To properly install your chain quick coupler we advise you to use a pliers.

As in the photo on the right above, you will notice that you must install the quick coupler as follows: the "unopened" part of the quick coupler must always be in the direction of rotation of the chain.

This piece is mounted on all channels in 420. Also find unreinforced 420 chain quick coupler as well as chain quick couplers in 428.

All chains in 420 are available on our website.