Electronic ignition cable and CDI box Peugeot 103 Fifty

Ignition cable (stator) to CDI box with light output Peugeot 103 electronic

Complete new wiring adaptable for moped, 50cc moped Peugeot 103 Clip, Chrono, MVL, RCX, SPX, SP, Vogue...

The green / yellow wire with the flat terminal (CDI output) does not connect to the high voltage coil, this wire is a circuit breaker. For the connection, you need to make a shunt (U) with the round lugs connect them together with the screw that holds the high voltage coil (coil support) and then connect a wire that connects the green / yellow (round lug) to go to the flat terminal of the high voltage coil.

Technical characteristics and dimensions of the wiring harness

• Mark: Fifty moto parts
• Total length of the beam: 520 mm
• 5 pins connection on the CDI box
• 3 pins connection on the electrical harness
• 2 pin connection on the HV coil
• 6 wire connection on electronic ignition
• 1 wire connection on the ignition sensor