Rear sprocket 38 teeth steel 520 Sym Trackrunner 200, E-Tone Yukon, Viper, Challenger 150, Vector 250 and 300 Afam

Rear sprocket 38 teeth Afam Sym Trackrunner 200, E-Tone Yukon, Viper, Challenger 150, Vector 250 and 300

Transmission tray par new chain adaptable for quad 150cc, 200cc, 250cc, 300cc E-Ton Challenger, Vector, Viper, Yukon et Sym Trackrunner.

Technical characteristics and dimensions of the rear toothed pinion

• Mark: Afam
• Manufacturer Part Number: 92218-38
• Drive train type: 520
• Number of teeth: 38
• Material: steel
• Black color
• Number of fixing holes: 4
• Diameter of fixing holes: 10 mm
• Crown Fixing Hole Type: Smooth
• Fixing centers: 57 mm and 80 mm
• Inner diameter of the crown: 50 mm
• Rear sprocket dimensions shown on the diagram

It is essential that you you check the type of drive train you need before ordering. On small motorcycles, most 50cc use the 420 (width 6mm, center distance 12.7mm) but some 50s and most 125s use the 428 (width 7mm, center distance 12.7mm) even for 125 in 520 (width 6mm, center distance 15.8mm). All drive train parts, i.e. front sprocket, chain and rear sprocket, absolutely must be of the same type.

Applications:

E-TON CXL 150 Challenger (2002 - 2011)
E-TON EXL 150 ST Vipst (2005 - 2011)
E-TON EXL 150 ST Yukon (2005 - 2011)
E-TON RXL 150 Vipst (2005 - 2007)
E-TON VTX ST Vortex (2007)
E-TON VTX 300 Vortex (2007)
E-TON VXL 250 ST Vector (2006 - 2011)
E-TON VXL 250 Vector (2006 - 2007)
E-TON VXL 300 ST Vector (2007 - 2011)
E-TON YXL 150 Yukon (2000 - 2002)

SYM 200 Trackrunner (2005 - 2009)