Rear sprocket 48 steel teeth 520 Honda XR 600 R Afam

Rear sprocket 48 teeth Afam Honda XR 600 R ...

Transmission tray par new chain adaptable for enduro 600cc, 650cc and other Honda cylinders XR R ...

Technical characteristics and dimensions of the rear toothed pinion

• Mark: Afam
• Manufacturer Part Number: 10501-48
• Drive train type: 520
• Number of teeth: 48
• Material: steel
• Colour : grey
• Number of fixing holes: 6
• Diameter of fixing holes: 10 mm
• Crown Fixing Hole Type: Smooth
• Fixing centers: 75 mm, 130 mm and 150 mm
• Inner diameter of the crown: 130 mm
• Rear sprocket dimensions shown on the diagram

It is essential that you you check the type of drive train you need before ordering. On small motorcycles, most 50cc use the 420 (width 6mm, center distance 12.7mm) but some 50s and most 125s use the 428 (width 7mm, center distance 12.7mm) even for 125 in 520 (width 6mm, center distance 15.8mm). All drive train parts, i.e. front sprocket, chain and rear sprocket, absolutely must be of the same type.

Application:

HONDA FMX 650 (2005 - 2008)
HONDA FX 650 Vigor (1999 - 2003)
HONDA NX 500 Dominator (1988 - 1999)
HONDA NX 650 Dominator (1988 - 2002)
HONDA SLR 650 (1997 - 1998)
HONDA XR 600R (1988 - 1990)