Rear sprocket 44 teeth steel 520 Yamaha TT-R 250 Afam

Rear sprocket 44 teeth Afam Yamaha TTR 250...

Transmission tray par new chain adaptable for enduro 200cc and 250cc Yamaha DT-R and TTR.

Technical characteristics and dimensions of the rear toothed pinion

• Mark: Afam
• Manufacturer Part Number: 12301-44
• Drive train type: 520
• Number of teeth: 44
• Material: steel
• Colour : grey
• Number of fixing holes: 6
• Diameter of fixing holes: 8
• Crown Fixing Hole Type: Smooth
• Fixing centers: 88 mm, 152 mm and 175 mm
• Inner diameter of the crown: 152 mm
• Rear sprocket dimensions shown on the diagram

It is essential that you you check the type of drive train you need before ordering. On small motorcycles, most 50cc use the 420 (width 6mm, center distance 12.7mm) but some 50s and most 125s use the 428 (width 7mm, center distance 12.7mm) even for 125 in 520 (width 6mm, center distance 15.8mm). All drive train parts, i.e. front sprocket, chain and rear sprocket, absolutely must be of the same type.

applications:

YAMAHA DT 200R (1988 - 1995)
YAMAHA TT 250 R (1993 - 2004)