Braid handle for BGS tubeless tire repair

BGS tubeless tire repair bit punch

Tubeless tire repair tool for motorcycle, scooter, quad, moped, bicycle, car, car, trailer, truck, van, ride-on mower... Allows you to insert a wick into the a tire after a puncture.

Technical characteristics and dimensions of the puncture repair tool

• Brand: BGS
• Materials: plastic and steel
• Colour: black
• Overall length: 160 mm
• Overall width: 115 mm

The steps to follow to repair your flat tire (see typical diagram)

• We advise you to use a pair of gloves when using these bits
• Step 1: Locate the cause of the puncture then remove the body estranger using pliers or pliers.
• Step 2: Push a drilling tool in the hole and shape the hole par a back-and-forth movement.
• Step 3: Enter a wick using pliers (be careful of the glue), then insert the wick half into the needle of the wick tool.
• Step 4: Press the drill bit into the hole in the tire using the tool, while performing a right/left twisting motion. Continue until the ends of the wick no longer stick out more than 2 inches.
• Step 5: Place the wick in the tire by turning the tool a quarter turn then, pull the tool out sharply.
• Step 6: Cut the ends of the wick to 3 mm from the tire and re-inflate it.
• Once repaired, be sure to check and readjust your tire pressure.