Rear sprocket 32 teeth steel 420 Yamaha Chappy 50 Afam

32 crown teeth 420 Afam Yamaha Chappy 50

Transmission tray par new chain adaptable for motorcycle 50cc Yamaha Chappy of 1973 1996 to.

Technical characteristics and dimensions of the rear toothed pinion

• Mark: Afam
• Manufacturer Part Number: 12100-32
• Drive train type: 420
• Number of teeth: 32
• Material: steel
• Colour : grey
• Number of fixing holes: 8
• Diameter of fixing holes: 8 mm
• Crown Fixing Hole Type: Smooth
• Fixing centers: 23 mm and 60 mm
• Inner diameter of the crown: 44 mm
• Rear sprocket dimensions shown on the diagram

It is essential that you you check the type of drive train you need before ordering. On small motorcycles, most 50cc use the 420 (width 6mm, center distance 12.7mm) but some 50s and most 125s use the 428 (width 7mm, center distance 12.7mm) even for 125 in 520 (width 6mm, center distance 15.8mm). All drive train parts, i.e. front sprocket, chain and rear sprocket, absolutely must be of the same type.

applications:

MBK 50 X Limit Enduro (1997 - 2002)

YAMAHA DT 50M (1978 - 1982)

YAMAHA DT 50 MX (1981 - 1995)

YAMAHA DT 50R (1988 - 2002)

YAMAHA DT 80 MX (1981 - 1983)

YAMAHA FS1E50 (1974 - 1976)

YAMAHA FS1E50DX (1977 - 1979)

YAMAHA LB50 Chappy (1975 - 1986)

YAMAHA RD 50 (1978 - 1983)

YAMAHA RD 50 DX (1976 - 1977)

YAMAHA RD 50 M (1977 - 1978)

YAMAHA TY 50 M (1977 - 1981)

YAMAHA TY 80 (1980)

YAMAHASR 50 T (1987)

YAMAHASR 80 (1987 - 1990)