Tubeless tire puncture repair kit with "braid" wicks (patches and glue) Thumbs Up

Thumbs Up Tubeless Tire Repair Kit

Tubeless tire repair kit for road or city bike, eBike or VAE electric bike, gravel, trekking, BMX, mountain bike (all-terrain bike), hybrid bike, muscle bike, children's or adult bike, women's or men's bike and other types of bikes.

This puncture repair kit allows you to seal the puncture area after removing the body.ranger (nail, screw, etc.) from your tire (without removing it) so that you can continue your journey in complete safety without damaging your wheel. For these wicks, we speak of repair par outside, par opposition to reparation par mushroom which is done from the inside of the tire with a patch (removal of the tire necessary).
This kit can be used if the puncture is present on the tread and not on the sidewall of the tire, the puncture diameter must be less than 6 mm and the internal structure of the tire must not be damaged. teriorepar the puncture. It is also necessary that the tire has never run flat and that it has not already undergone a repair before.

This set includes

• 3 x 2G CO16 threaded cartridges
• 1 x pressure regulator
• 2 x Tire Removers
• 1 x blade
• 1 x metal grater (scraper)
• 1 x dissolving glue tube 8ml
• 2 x adapter for presta valve
• 1 x Valve Fitting
• 2 x Drill Bit Tools
• 5 x wicks (braids) 5x98 mm
• 2 x round pellets Ø24 mm
• 2 x rectangular pellets 24x35 mm
• 1 x rectangle pellet 32x50 mm

Technical characteristics of the anti-puncture kit

• Brand: ThumbsUp
• Compact, this kit can easily be transported

Steps to follow to repair your punctured inner tube

• Step 1: Remove your wheel and then your tire (using the tire levers provided) in order to extract the inner tube
• Step 2: Locate the hole on the inner tube
• Step 3: Rub the surface where you are going to stick the patch with the abrasive cloth provided
• Step 4: Clean and dry the surface
• Step 5: Position the self-adhesive patch over the hole and press firmly for 1 minute
• Step 6: Re-install your inner tube into the tire, then the tire onto the rim
• Step 7: Re-inflate the inner tube using the CO2 cartridge provided
• Step 8: Remount your wheel

Dangerous. Respect the precautions for use. All liquids and chemicals must not come into contact with skin, eyes and must not be ingested. When handling them, protect yourself with personal protective equipment (EPI).
Safety Information: All liquids should be kept out of the reach of children. DANGER, corrosive product. In case of eye contact, flush immediately with plenty of water for 10 minutes. If irritation persists, seek medical attention. If swallowed, seek medical advice immediately and show this container or the label.
All products in aerosol form must be kept out of the reach of children. Extremely flammable aerosol. Pressurized container: may burst if heated. May cause damage to organs through prolonged or repeated exposure. Causes skin irritation. Causes serious eye irritation. May cause drowsiness or dizziness. May be fatal if swallowed and enters airways. In case of consultation with a doctor, keep the container or the label available.