Turn signal front left, rear right Derbi, Gilera, Yamaha TZR...transparent

Type front left or rear right indicator Derbi, Yamaha...

Direction light rear right or front left new adaptable for motorcycle 50cc, 125cc Yamaha TZR, MBK Xpower, Derbi, Gilera... Flashing block complete with cabochon.

Technical characteristics and dimensions of orange side lighting

• Brand: generic
• Material : plastic
• Turn signal total length (without thread): 110 mm
• Total length of wires: 400 mm
• Flashing color: black
• Cabochon color: transparent white
• Bulb type BA15S fourdenies: yes
• Fixing hole diameter: 6 mm
• Approved flashing light

Adaptable turn signal connections for derbi, gilera, tzr, ... are easily done using two wires. To fix the indicators, have a 13 Flat Key. If your turn signals are a little hidden behind your headlight plate, you can use a washer or a nut to make a type of "wedge" and make your flashers completely visible.

Connection: - If your wiring harness has two round lugs (like the left side of the right picture above), you'll just have to plug your lugs (wire - on wire -, and wire + on + wire). Be careful, the colors of the wires vary depending on the model.

- If your beam does not have round lugs, it will be necessary to adapt your connection (see picture on the right above). To get yourself armed 2 pin connector and a needle-nose plier.