Transmission tray par new chain adaptable for 50cc motorcycle Derbi Senda, Rieju MRT, Yamaha DT Peugeot XP6 ...
Technical characteristics of the crown
Brand: generic
Drive train type: 420
Number of teeth: 50
Material: steel
Colour: grey
Number of fixing holes: 6
Type of mounting holes: smooth
Dimensions of the rear pinion (see marks on the typical drawing)
A - Fixing center distance: 80 mm
B - Fixing center distance: 42 mm
C - Fixing center distance: 123 mm
D - Diameter of fixing holes: 8 mm
E - Inner diameter of the crown: 105 mm
It is essential that you you check the type of drive train you need before ordering. On small motorcycles, most 50cc use the 420 (width 6 mm, center distance 12.7 mm) but some 50s and most 125s use the 428 (width 7 mm, center distance 12.7 mm) even for 125 in 520 (width 6 mm, center distance 15.8 mm). All drive train parts, i.e. front sprocket, chain and rear sprocket, absolutely must be of the same type.
COMPATIBLE MODELS
Compatibility models for guidance, it is advisable to disassemble the part to be replaced beforehand and check the correspondence with pictures and dimensions indicated on the site.