Motorcycles, quads, scooters parts and equipment

420 chain quick coupler DID hyper enhanced

3,20

UN0863

IN STOCK

NEW

Deliveredison possible from Wednesday September 28


DID

We also recommend

Description

420 chain split link for motorbikes and quads

New quick link chain mesh suitable for motorcycle, quad, buggy 50cc, 125cc and other displacements.

Important: The chain is made of different meshes, or links, and can be of different widths. It is essential to you check the type of drive train you need before ordering. On small motorcycles, most 50cc use the 420 (width 6mm, center distance 12.7mm) but some 50s and most 125s use the 428 (width 7mm, center distance 12.7mm) even for 125 in 520 (width 6mm, center distance 15.8mm). All the parts of the kit, namely the pinion, the chain and the crown.vent imperatively to be of same type.

For the assembly of your quick-release link, a multigrip pliers andventOr a flat screwdriver will suffice, no need to use a chain drift if you do not want to shorten it, so remember to count the number of links you need.

Technical characteristics and dimensions of the fastener

  • Mark: DID
  • Drive train type: 420
  • Quality: hyper reinforced
  • Quick mesh colors: black and gray
reinforced quick coupler of 50cc chain with boxmotorcycle chain split link 50

To properly install your chain quick coupler we advise you to use a pliers.

As in the photo on the right above, you will notice that you must install the quick coupler as follows: the "unopened" part of the quick coupler must always be in the direction of rotation of the chain.

This piece is mounted on all channels in 420. Also find unreinforced 420 chain quick coupler as well as chain quick couplers in 428.

All chains in 420 are available on our website.

We also recommend

Products already seen

HERE 100% OF THE PARTS INDICATED IN STOCK ARE REALLY IN OUR DEPOT!