Rear sprocket 41 teeth steel 420 Yamaha DT MX, DTR, FS1, RD50... gray

Rear sprocket 41 teeth Yamaha DT MX 50, DTR50, FS1, RD50 and MBK ZX

Transmission tray par new chain adaptable for motorcycle 50cc Yamaha DT DT MX, FS1, RD and MBK ZX up to 1995.

Technical characteristics and dimensions of the rear toothed pinion

• Brand: generic
• Drive train type: 420
• Number of teeth: 41
• Material: steel
• Colour : grey
• Number of fixing holes: 4
• Diameter of fixing holes: 8 mm
• Crown Fixing Hole Type: Smooth
• Fixing centers: 42 mm and 60 mm
• Inner diameter of the crown: 44 mm
• Rear sprocket dimensions shown on the diagram

It is essential that you you check the type of drive train you need before ordering. On small motorcycles, most 50cc use the 420 (width 6mm, center distance 12.7mm) but some 50s and most 125s use the 428 (width 7mm, center distance 12.7mm) even for 125 in 520 (width 6mm, center distance 15.8mm). All drive train parts, i.e. front sprocket, chain and rear sprocket, absolutely must be of the same type.