Rear sprocket 48 teeth steel 420 Yamaha Chappy, FS1,RZ, DT MX 50, MBK ZX ... Supersprox black

Rear sprocket 48 teeth Supersprox black Yamaha Chappy, FS1, RZ, MBK ZX... 50...

Transmission tray par new chain adaptable for motorbike, motorbike cross 50cc and other displacements Yamaha Chappy, FS1, RZ, MBK ZX ...

Technical characteristics of the crown

• Mark: Supersprox
• Drive train type: 420
• Number of teeth: 48
• Material: steel
• Colour: black
• Number of fixing holes: 4
• Type of mounting holes: smooth

Dimensions of the rear pinion (see marks on the typical drawing)

• A - Fixing center distance: 56 mm
• B - Fixing center distance: 80 mm
• C - Diameter of fixing holes: 8 mm
• D - Inner diameter of the crown: 64 mm

It is essential that you you check the type of drive train you need before ordering. On small motorcycles, most 50cc use the 420 (width 6 mm, center distance 12.7 mm) but some 50s and most 125s use the 428 (width 7 mm, center distance 12.7 mm) even for 125 in 520 (width 6 mm, center distance 15.8 mm). All drive train parts, i.e. front sprocket, chain and rear sprocket, absolutely must be of the same type.